english
Taifun® GT III – User Manual
18
Coil example
The two screws are loosened slightly,
in order to fix the wire.
The wire is placed behind the winding
aid.
Now guide the wire from bottom to
top around the winding aid.
Repeat this until you have the desired
number of turns.
Now you can fold the ends of the
wire a little. This makes the coil
easier to attach.
The wire is placed around the screws
...
... and then clockwise around the
screws.
Use a suitable screwdriver to tighten
the screws. The rotary movement
during clamping, also tightens the
wire.
The same is done with the second
screw. The winding aid should be
held so that the coil does not move.
Now you can adjust the coil a bit, if
necessary.
Carefully remove the winding aid.
Cut the wire ends flush with the screw
heads.