Chapter 2. Installation and connection
2.1 Installation
Put the 1U Multi-format Video & Audio Processor into
the cabinet and fix it by screws. As figure 1.2.
2
Figure 1.2 Installation
2.2 Connection between Processors and
PC
Multi-format Video & Audio Processor can be
controlled by Central Control System via TCP/IP or
RS-232 interface and be software upgraded via
RS-232 interface.
2.3 Connection with input, output
devices
The number of input and output ports is differing,
according to the type chosen. Every audio or video
device with an AV port can be connected to the
Multi-format Video & Audio Processor. Output ports can
be connected to recorder, video or audio monitor, PA and
so on, as shown in figure 1.3.
Control Interface:
Control
RS-232
9 pin female D connector
COM
Baud rate: adjustable, data: 8 bits,
stop: 1 bit, no parity check bit
Interface
2=TX, 3=RX, 5=GND
Ethernet RJ-45
Ethernet protocol
TCP/IP
Ethernet speed
10M/100M
Figure 1.3 Connection example for input and output devices to
Multi-format Video & Audio Processor
