3.9 Factory Default
Enable/disable to reset the TMX-MV2SDI to the factory
default setting. Factory default parameter as follows:
input signal is HDMI; SDI/ HDMI output resolution is
1280
×
720p60; line in sensitivity is 0dB; line out
volume is 0dB; RTC is close.
3.10 COM baudrate
3.11 VGA input Pos
Set up the picture position of VGA input. Include: “Left
or Right” and “Up or Down”. The range of any direction
is 0 to 128, step is one pixel.
Set up the COM baudrate. Include 9600
、
19200
、
38400
、
57600
、
115200.
For setup of “Up or Down” proceed such as described
in “Left or Right”.
3.12 About
Display the type and the firmware version of the
switcher.
1
. Press “MENU” to enter and press “
Õ
/
Ö
”
until “VGA input Pos” prompts;
2. Press “MENU” to enter and press “
Õ
/
Ö
”
until “a. Left or Right” prompts;
3. Press “MENU” to enter;
4. Press “
Õ
/
Ö
” to adjust parameters;
5.
Press “MENU” to confirm.
11. VGA input Pos
11. VGA input Pos
a. Left or Right
a. Left or Right
0
11. VGA input Pos
a. Left or Right
a. Left or Right
L: 6
1
. Press “MENU” to enter and press “
Õ
/
Ö
”
until “COM baudrate” prompts;
2. Press “MENU” to enter setup;
3. Press “
Õ
/
Ö
” to select parameter;
4. Press “MENU” to confirm.
10. COM baudrate
10. COM baudrate
▋
115200
10. COM baudrate
▋
9600
10. COM baudrate
In:YPbPr Out:VGA
Res:800
×
600p60
1. Press “MENU” and press “
Õ
/
Ö
” until
“About” prompts;
2. Press “MENU” enter and press “
Õ
/
Ö
” to
see the information.
12. About
Ver:1.00.00.04
Ser:746500000144
In:YPbPr Out:VGA
Res:800
×
600p60
1
. Press “MENU” to enter and press “
Õ
/
Ö
”
until “Factory Default” prompts;
2. Press “MENU” to enter setup;
3. Press “
Õ
/
Ö
” to select parameter;
4. Press “MENU” to confirm.
9. Factory Default
9. Factory Default
▋
Yes
9. Factory Default
▋
No
9. Factory Default
In:YPbPr Out:VGA
Res:800
×
600p60
In:VGA Out:HDMI
Res:AUTO
Note
：
)
This menu can only adjust when the input type
is VGA.
7
