5. “DCS Units Class”
Enable the chairman unit and VIP unit(s). “DCS Units
Class” interface displays the ID of current chairman and
the total number of VIP units, and includes two
submenus:
“Chairman”
“VIP”
“Chairman”
1. Press the “
/
” button to select “Chairman” and
press the “MENU” button to enter;
2. The button indication lights of all chairman units are
flashing, press any chairman unit to enable and its
light will be turned on, press the button again to
cancel;
3. Press the “EXIT” button to return to upper level menu.
There is only one chairman unit can be enabled as the
control unit in a system; other units will be the same
function as the delegate unit.
“VIP”
1. Press the “
/
” button to select “VIP” and press the
“MENU” button to enter;
2. The Mic. ON/OFF key indication lights of all units
(except the enabled chairman unit) are flashing,
press the units one by one to enable VIP and their
lights will be turned on, press the button again to
cancel;
3. Press the “EXIT” button to return to upper level menu.
The maximal number of VIP units is 32.
6. “Speech Timer”
Set a speech time, range: 1-240 minutes.
1.
Press “
/
” to set speech timer On/Off:
If “Off” is selected, press the “MENU” button to
confirm and return to upper level menu;
If “On” is selected, press the “MENU” button to
confirm and go to step 2;
2.
Press the “
/
” button to switch between “Speaking
Time * Minutes” and “Before End * Seconds”;
3.
Press “MENU” to select the number of highlight item;
4.
Press the “
/
” button to set time and press
“MENU” to confirm;
5.
Press the “EXIT” button to save and return to upper
level menu.
7. “Mic Parameters Setting”
Setting the Mic Low Cut and the Mic Gain.
“Mic Low Cut”
1. Press the “
/
” button to select “Yes” or “No”;
2. Press “MENU” button to save and return to upper
level menu.
“Mic Gain”
1. Press the “
/
” button to select “Apply to All
Microphones” or “Apply to Active Microphones” and
press the “MENU” button to enter;
2. Press the “
/
” button to select “Step Adjustment” or
“Specified Value”
“Step Adjustment”:
press the “
/
” button once to
increase/reduce 1 dB;
“Specified Value”:
press
the “
/
” button to switch
the gain, range:-15 dB to +15 dB;
13
