Taiden HCS-3938C, Installation And Operating Manual

Page: 15 / 58

Figure 2.1
1. Power switch
2. REC indicator light

REC light turn off when stopping recording;

The recording will switch to the other device when
SD card or USB drive is full without interruption,
and the state of REC light flashing will be changed
according to the storage room of the recorder
(refer to table 2.1).
3. “MENU” button
a. The OLED displays the
UUUUUUU
initial
UUUUUUU
user interface: press
this button to enter the LCD
UUUUUUU
set-up
UUUUUUU
menu;
b. The OLED displays the
UUUUUUU
set-up
UUUUUUU
user interface: press
this button to select the highlighted item or enter
the submenu.
4. “

” (Down) button

The LCD displays the
UUUUUUU
initial
UUUUUUU
user interface: press
this button to select the number of maximum
active microphones;

The OLED displays the
UUUUUU
set-up
UUUUUU
user interface:
press this button to move down the cursor.
5. “EXIT” button

The OLED displays the
UUUUUUU
initial
UUUUUUU
user interface: press
this button to switch Mic. mode;

The OLED displays the
UUUUUU
set-up
UUUUUU
user interface:
press this button to exit or return to the upper level
menu.
6. Menu display

256×64 OLED displays main unit status and
configuration menu.
7. Line in volume control
8. Master volume control
9. Earphone volume control
10. USB interface

Be connected to USB drive with the capacity up to
64 G for MP3 recording;

For upgrade of recording application.
11. SD card slot

Supports up to 32 G SD card for MP3 recording.
12. Monitoring earphone interface (Ø 3.5 mm).
13. “

” (Up) button

The OLED displays the
UUUUUUU
initial
UUUUUUU
user interface: press
this button to select the number of maximum
active microphones;

The OLED displays the
UUUUUU
set-up
UUUUUU
user interface:
press this button to move up the cursor.
14. Power indicator light
15. RS-232 port
16. LINE IN 1 (3 cord XLR balanced input)
17. LINE IN 2 (RCAx2 unbalanced input)
18. LINE OUT 2 (RCAx2 unbalanced output)
19. LINE OUT 1 (3 cord XLR balanced output)
20. Ethernet

For communication between the conference main
unit and the PC under TCP/IP protocol to realize
remote controlling; furthermore, it enables remote
controlling by wireless touch panel through central
control system.

For data communication and upgrade.
21. Video switch interface

When cooperating with video switch and dome
camera, auto video tracking can be realized.
22. USB_H interface, for upgrade
23. USB_D interface, for upgrade, for digital audio
input/output
24. Contribution units output interface (two routes,
6P-DIN sockets)
25. Grounding post
26. Power supply
27. Loudspeaker
Table 2.1 List of REC indicator light state
Recording media and flashing state
Current media A (USB drive or SD card)
<10M 10~30M 30~50M >50M
Recording media B
(SD card or USB drive)
<10M Stop recording flash fast flash slow on
10~30M B in use / flash fast flash fast flash slow on
30~50M B in use / flash slow flash fast flash slow on
>50M B in use / on flash slow on on
No device Stop recording flash fast flash slow on
B
7