10
CONNECTING TO POWER
CARE AND MAINTENANCE
REPLACING THE BATTERY
NOTE:
A 13 amp, 240 volt circuit is required. A dedicated circuit is preferred but not
essential. A dedicated circuit will be required if the circuit breaker trips or fuse blows on
a regular basis when the heater is operating. Additional appliances on the same circuit
may exceed the current rating of the circuit breaker.
WARNING:
Don’t use the firebox with regular extension cords. If the cord is not long
enough you may use only special extension cords rated for a minimum of 13 Amps.
Make sure the unit is turned OFF and unplugged before cleaning the heater or fireplace.
We recommend periodic vacuuming of the fan/heater.
Remove dust with clean dry cloth.
Remove fingerprints and other marks from glass screen by using a clean damp cloth. Do not use
abrasive cleaners or spray liquids on the glass window surface.
The remote control works with 2 x AAA 1.5 V standard batteries.
NOTE:
Please always dispose of batteries at a suitable
recycling point.
CAUTION:
Always purchase the right size and grade of battery most suitable for the intended use.
Replace all batteries of a set at the same time.
Clean the battery contacts and also those of the device prior to battery installation.
Ensure the batteries are installed correctly with regard to polarity (+ and -).
Remove batteries from equipment which is not to be used for an extended period of time.
Remove used batteries promptly.
Do not mix old and new batteries.
Do not mix alkaline, standard (carbon zinc), or rechargeable (nicd, nimh, etc.) batteries.
Do not ingest batteries.
!
AAA1.5V
AAA1.5V
+
+
EN
