background image

2

WARNINGS 

Read all safety information before you use the product.
Please pay attention when you see a warning label on the product.

This product is for indoor use only.

You must not discard this electrical/electronic product in domestic household waste. 
Please dispose at your local recycling centre.

INTENDED USE 

This product, consisting of a circular light source, a controller and power supply is intended as 
an add-on to existing magnifying solutions to provide high quality shadowless illumination.

1.  Read the manual before you use the product
2. 

Use the product only as specified, or the protection supplied by the product can 

 

be compromised

3. 

Do not position the equipment so that it is difficult to operate the disconnecting 

 

device  (appliance  inlet  of  external  power  supply,  equipment  input  connector)                                                                                    

4.  If fluids are spilled on the product, turn the system off immediately by pulling the power  

supply out of the electrical outlet

5.  Please do not connect the product, if visible damages appear
6.  Do not dismantle any parts of the product, except where noted in the manual
7.  Use only the power supply provided from TAGARNO
8.  Do not look directly into the light source
9.  Please note that UV lamps degrade over time. Within 2000 hours of use the intensity is 

reduced to 80%

10. 

When using the UV ring light, be aware that the UV LEDs when in operation emit invisible 
ultraviolet radiation, which may be harmful to eyes and skin, even for brief periods. Do 
NOT look directly into the UV LED during operation. Be sure that you and all persons in 
the vicinity wear adequate UV Safety protection for eyes and skin.

2.  WARNINGS 

1.  INTENDED USE 

3.  WARNING LABEL

This following label is placed visibly on the product:

WARNING Possibly 

hazardous optical radiation 

emitted from this product.

AVERTISSEMENT Ce produit émet un 

rayonnement optique 

potentiellement dangereux.

WARNING UV emitted from 

this product. Avoid eye and 

skin exposure.

AVERTISSEMENT Ce produit émet un 

rayonnement ultraviolet. Évitez d’exposer les 

yeux et la peau.

UV

UV

WARNING IR emitted from 

this product. Do not look at 

operating lamp.

AVERTISSEMENT IR émise par ce produit. 

Ne regardez pas la lampe d’exploitation.

IR

IR

Summary of Contents for Ring Light Series











Reviews: