6
7. OPERATION
LIGHTS CONTROL BOX
The control box uses finger touch. It contains a touch button
with LED indicator and these touch sliders:
SOFTWARE ADAPTION FOR IR RING LIGHT
Power/LED indicator
Touch the button for half a second to switch between
power on and off
LED green = ON
LED off = OFF
LED blinking red = No ring light detected
Intensity
Use the sliders to decrease or increase the light intensity,
respectively, or press on the slider to choose light intensity level.
Segmentation
Select the number of active LED segments from 1 to 16
Rotation
Rotate the active segments from 0 – 360°
An indicator in the top left corner of the monitor will show the
current settings of the ring light as they are being changed.
NB: When turning the microscope off, the ring light will also
switch off. The settings used at its last use will be recalled once
the microscope is turned back on.
When using the IR Ring light, the IR filter must be deactivated in the Set up
menu of the microscope.
Click this icon to disable/enable the IR filter.
