Taga DA-300 v.3, Instruction Manual

Page: 7 / 16

7
Operation
1. Plug the DC Adapter Power Cable to the DAC and connect the adapter with the
electrical outlet.
2. Turn on the DAC – press the Power Switch (the Power Switch should be in the
position “I - ON”).
3. The USB LED indicator will lit red and the DAC is ready to work with a computer.
The USB input is set as a factory default each time the DAC is turned on.
4. By pressing Input Select button, select one of digital audio sources you want to
play. Make sure the audio source is properly connected to the rear panel inputs.
The selected source is indicated by one of LED indicators on the front panel.
5. Turn on your main audio equipment (amplifier, receiver, powered speakers etc.),
choose the line input to which this DAC is connected, turn on the audio source
and start playback.
Note!
Turn ON procedure:
make sure to turn on the DAC firstly and then your main audio
equipment (amplifier, receiver, powered speakers etc.).
Turn OFF procedure: make sure to turn off the DAC after your main audio equipment
(amplifier, receiver, powered speakers etc.) is off.