8
1. Make sure that the subwoofer is turned off (the POWER Switch is in the OFF position and the Power
Cable is removed).
2. Make sure that your audio equipment (amplifi er/preamplifi er/AV receiver) is turned off .
3. Turn the VOLUME regulator to MIN (max counter clockwise).
4. Choose one of the following connection methods:
Hooking Up The Subwoofer
I. CONNECT USING LFE(SUB OUT) SUBWOOFER OUTPUT [PREFERRED]
This connection is recommended if your audio equipment is equipped with a single fi ltered RCA
subwoofer output (usually marked as LFE, SUB OUT, SUBWOOFER etc.).
There are 2 options of connection:
a) Using a single RCA subwoofer cable - connect the LFE output with the SUB low level input on
the rear of the subwoofer.
b) Using an Y-type subwoofer cable (1xRCA to 2xRCA) - connect the 1xRCA plug to the LFE
output and the 2xRCA plugs to the L and R low inputs on the rear of the subwoofer.
Note!
The Y type connection increases the bass output of the subwoofer by a few decibels.
II. CONNECT USING STEREO RCA OUTPUT (L/R)
If your audio equipment is not equipped with a fi ltered LFE(SUB OUT) subwoofer output then you
can use regular stereo RCA outputs (non-fi ltered).
There are 2 options of connection:
a) Using a pair of RCA subwoofer cable - connect the L/R RCA outputs of your audio equipment to
the L and R low inputs on the rear of the subwoofer.
b) Using an Y-type subwoofer cable (1xRCA to 2xRCA) - connect the 2xRCA plugs to the L/R RCA
outputs of your audio equipment and the 1xRCA plug to the L or R low input on the rear of the
subwoofer.
III. CONNECT USING SPEAKER OUTPUTS
You can use regular speaker cables to connect the subwoofer with your audio equipment – this
process is the same as connecting basic stereo speakers.
Using the speaker cables connect speaker output connectors located on your audio equipment to
the HIGH INPUT connectors on the rear of the subwoofer (Left with Left, Right with Right).
Pay attention to connecting the polarity of the audio equipment correctly with the subwoofer in
each speaker connector group (the subwoofer should be connected RED + with RED + audio
equipment connector, BLACK – with BLACK – audio equipment connector).
AV receiver, Amplifi er etc.
LFE (SUB OUT)
single RCA output
I-a) Single RCA-RCA cable
I-b) Y type RCA cable (2xRCA<-1xRCA)
AV receiver, Amplifi er etc.
L/R RCA outputs
II-a) Pair of RCA-RCA cables
AV receiver, Amplifi er etc.
Speaker outputs
III) Speaker cables
II-b) Y type RCA cable (1xRCA<--2xRCA)
