9
Speaker Placement and Set-up
2. Run the speaker cable through the Surface
Mount and the Mount Arm and connect it to
the the Quick Speaker Connector – Terminal
Block (check “Connect the sound source” for
more details).
3. Plug in the Quick Speaker Connector –
Terminal Block to the terminal socket (check
“Connect the sound source” for more details).
Using a screwdriver attach the Mount Arm to
the Speaker.
4. Firmly mount the seal cap back to the
Speaker.
Using the Internal Hex Wrench attach the
Surface Mount to the Mount Arm.
Note:
Do not tighten the Hex Screw too firmly.