6
Speaker Placement and Set-up
Required tools (not supplied with this product)
Depending on the mounting surface and option prepare some of the following tools:
Connect the sound source
Make sure that your sound source (amplifier, receiver etc.) is switched off.
1. Depending on the installation option (check “Installation options” for more details)
run the speaker cable properly through the Surface Mount and the Mount Arm.
2. Using a screwdriver unscrew the connectors on the Quick Speaker Connector –
Terminal Block and connect the bare speaker cable.
Each channel of your amplifier should be connected to a single speaker. The amplifier
output speaker terminal marked with + (RED color) should be connected to the +
terminal connector of your TRS L speaker and the one marked with – (BLACK color)
with - terminal connector of your TRS L speaker.
Follow the same for the other speaker channel.
