9
1. Make sure the amplifier is turned off (the Power Switch
and the Power
Cable is removed from the wall outlet).
2. Turn the Volume Regulator of each ZONE to MIN (max counter clockwise).
3. Using speaker cables (not supplied with this product) connect your speakers
to the SPEAKERS OUT (choose the ZONES you want to use) connectors located
on the rear panel. Check „Hooking Up Speaker Cables” for more details.
4. If you want to play music from an analog audio source device (CD player, satellite
or FM tuner, video console etc.): using RCA interconnect cables (not supplied with
this product) connect it to the analog input on the rear panel (AUX).
5. If you want to play music from an analog audio source device (smartphone,
computer etc.): using a 3.5 mm (1/8") mini jack interconnect cable (not supplied with
this product) connect it to the analog 3.5 mm (1/8") input on the front panel (MP3).
6. If you want to play digital audio files connect a USB Flash Drive (not supplied with
this product) to the USB Port on the front panel.
Make sure that this amplifier supports the files you want to play.
Check “Play from a USB Flash Drive” for more details.
7. If you want to use a microphone: using a 6.35 mm (1/4") jack interconnect cable (not
supplied with this product) connect it to the Microphone 6.35 mm (1/4") input on the
front panel (MIC).
8. Your amplifier is ready for operation.
Hooking Up the Amplifier
Only speakers within range of impedance 4 - 16Ω may be connected to
this amplifier. Connecting speakers outside this range may damage this
amplifier and/or speakers. This may void your warranty.
Only speakers of the same impedance may be used for a single ZONE
(for example: ZONE 1: if you use 4Ω speakers in the left channel then
you have to use 4Ω speakers in the right channel) – otherwise this
amplifier and/or speakers may be damaged.
This may void your warranty.
Each ZONE may use different impedance of speakers, for example:
ZONE 1 4Ω speakers, ZONE 2 8Ω speakers, ZONE 3 6Ω speakers etc.
