10
Operation
1. Plug the Power Cable to the amplifier and into the electrical outlet.
2. Turn on the amplifier – press the Power Switch (the Power Switch
).
The Power Status Indicator around the Power Switch should turn on in a few
seconds.
If it does not, it means that the amplifier is working under an abnormal condition
(a protection mode) – turn off the power, unplug the Power Cable and check whether
some of the cables are not short circuited.
After fixing the cables turn the amplifier on.
3. For each ZONE which you want to use, using the Input Selector knob select which
audio source you want to play (corresponding to the selected input).
- the ZONE is inactive.
Make sure the audio source is properly connected to the front and rear panel inputs.
4. Turn on your audio source and start playback.
5. For each ZONE regulate volume on the amplifier to adjust the level of sound.
Note!
Check “Additional Information” for other useful operating instructions.
High volume levels may damage this amplifier and/or speakers.
This may void your warranty.
Operations available individually for each ZONE:
VOLUME Regulator:
Using the Volume Regulator on the front panel, you can adjust the sound volume from
minimum (the knob – max counterclockwise) to maximum (the knob – max clockwise).
TREBLE regulator:
You can adjust treble output of the amplifier. The default: the knob is in the center
position: the marker on the knob in the vertical position.
Turn the knob counterclockwise (-) to decrease the amount of high frequencies.
Turn the knob clockwise to increase the amount of high frequencies (+).
BASS regulator:
You can adjust bass output of the amplifier. The default: the knob is in the center
position: the marker on the knob in the vertical position.
Turn the knob counterclockwise (-) to decrease the amount of low frequencies.
Turn the knob clockwise (+) to increase the amount of low frequencies (+).
Distortion and sound quality worsening may occur when the knob is in
the maximum position. It may damage the amplifier and/or speakers.
This may void your warranty.
Using the BASS / TREBLE regulators at high volume levels
may damage this amplifier and/or speakers.
This may void your warranty.
