background image

11

4. Using the Input Selector knob select which audio source you want to play (corre-

sponding to the selected input).  

Make sure the audio source is properly connected to the front and rear panel inputs.

5. Turn on your audio source and start playback.

6. Regulate volume on the amplifier to adjust the level of sound.

Note!

 Check “Additional Information” for other useful operating instructions.

 

VOLUME regulator:

Using the Volume Regulator you can adjust the sound volume from minimum (the knob 

– max counterclockwise) to maximum (the knob – max clockwise).

TREBLE regulator:

You can adjust treble output of the amplifier. The default: the knob is in the center 

position: the marker on the knob in the vertical position. 

Turn the knob counterclockwise (-) to decrease the amount of high frequencies. 

Turn the knob clockwise to increase the amount of high frequencies (+).

BASS regulator:

You can adjust bass output of the amplifier. The default: the knob is in the center 

position: the marker on the knob in the vertical position. 

Turn the knob counterclockwise (-) to decrease the amount of low frequencies. 

Turn the knob clockwise (+) to increase the amount of low frequencies (+). 

Operation 

Using the BASS / TREBLE regulators at high volume levels may 

damage this amplifier and / or speakers. This may void your warranty.

Distortion and sound quality worsening may occur when the knob is in 

the maximum position. It may damage the amplifier and / or speakers. 

This may void your warranty.

High volume levels may damage this amplifier and / or speakers. 

This may void your warranty.

BALANCE regulator:

You can adjust the balance of the volume output from the left and right speakers.

Turn the knob towards the speaker (channel) which you want the volume output to be

higher than in the other speaker (channel).

The default: the knob is in the center position: the marker on the knob in the vertical 

position.

Preamplifier Output connection (PRE OUT):

This amplifier is equipped with the preamplifier output, which allows connecting ampli-

fication or recording equipment such as a power amplifier, powered speakers, active 

subwoofer or a CD recorder.

The audio signal from the preamplifier of this device is directed to the PRE OUT and its 

level is variable controlled by the Volume Regulator.

All sound adjustments (Bass / Treble) will affect the sound transmitted to the PRE OUT. 

The output to the SPEAKERS OUT is still active and it works simultaneously with the 

PRE OUT.

Summary of Contents for TA-400MIC

















Reviews: