10. External audio equipment connection options:
Hooking Up the Amplifier
Input / Output
TA-400MIC
Input / Output
external equipment
Connection cable
CD, AUX
input
Output - RCA sockets
RCA-RCA interconnect
(not supplied)
PRE OUT output
Preamplifier input
RCA-RCA interconnect
(not supplied)
MP3 3.5 mm (1/8”) input
Outputs:
3.5 mm (1/8”) socket
lub złącza RCA
3.5 mm mini jack - mini jack interconnect
(not supplied)
3.5 mm mini jack
-
RCA interconnect
(not supplied)
MIC 6.35 mm (1/4") input
6.35 mm jack interconnect
(not supplied)
The sockets and ports shown for external equipment and connection options may differ depending
on the device.
Operation
1. Plug the Power Cable to the amplifier and into the electrical outlet.
2. Turn on the amplifier – press the Power Switch (the Power Switch
).
The Power Status Indicator should turn on in a few seconds.
If it does not, it means that the amplifier is working under in abnormal condition
(a protection mode) – turn off the power, unplug the Power Cable and check whether
some of the cables are not short circuited.
After fixing the cables turn the amplifier on.
3. Using the Speaker Selector knob select which group of speakers (A or B or A+B)
you want to use.
If you want to use 2 pairs of speakers choose the A+B option.
10
