7
1. Make sure the amplifier is switched off (the Power Switch is in the top position and
the Power Cable is removed from the AC wall socket).
2. Turn the Volume Regulator to MIN (max counter clockwise).
3. Using speaker cables (not supplied with this product) connect your speakers to
SPEAKERS OUT (A or B, A and B) connectors located on the rear of the amplifier
(check Hooking up Speaker Cables for more details).
4. If you want to play analog audio source devices (CD player, satellite or FM tuner,
video console etc.) : using RCA interconnect cables (not supplied with this product)
connect them to the analog inputs (CD, AUX1, AUX2).
5. Your amplifier is ready for operation.
Note!
Avoid to short-circuit of cables – it can damage this amplifier or speakers. This
may void your warranty.
NOTE!
When using A or B speakers only, you can connect 4 – 8ohm speakers. When
using A and B speakers, you can connect 8 – 16ohm speakers - connecting speakers
with the impedance less than 8ohm can damage this amplifier or speakers. This may
void your warranty.
Hooking up the Amplifier
CD
AUX1
AUX2
RCA interconnect cable
Speaker cable
Group A
Group B
