8
Rear Panel:
13. MM / MC Phono Cartridge Selector
14. Analog Stereo RCA Inputs PHONO / LINE / CD
15. Phono Ground Screw
16. USB DAC Input Port
17. Power Cable Input and Fuse Box
Note:
A blown fuse should be only exchanged for exactly the same type as
indicated on the rear amplifier panel. The Power Cable should be disconnected!
18. Speaker Right Channel Output (Speaker Connectors)
19. Dimmer Switch
20. Speaker Left Channel Output (Speaker Connectors)
21.
Bluetooth®
Antenna Socket
22. Preamplifier Stereo RCA Output
23.
Digital Optical Input
Hooking Up Speaker Cables
The Speaker Connectors can accommodate up to 10AWG speaker cables as well
as most of popular plugs (banana etc.). A 10AWG cable is recommended for longer
connections (longer than 20 meters / 66 feet). For shorter lengths you can use 12/14
or 18 AWG cables. It is recommended to leave about 150 cm (5 feet) of extra cable
at the amplifier end to facilitate positioning and installation of the amplifier. Do not use
staples, nails or other metal objects to secure the cables. You will get the best sound
quality and least amount of hum by keeping the cables away from other electrical wires
and cables.
Pay attention to connecting the polarity of the amplifier correctly with the speakers
in each speaker group (speakers should be connected RED + with RED + amplifier
connector, BLACK – with BLACK – amplifier connector). Before connecting make sure
that your amplifier is switched off.
Please refer to your speaker instruction manual for more information.
Front and Rear Panel
