12
Operation
The DIRECT button will not affect the operation of the LOUD button.
Note:
Using at high volume levels can damage this amplifier and/or speakers. This
may void your warranty.
DIRECT (front panel):
Press the DIRECT button down (
) to enjoy the purest sound without any
adjustments (BASS and TREBLE regulators will be disabled).
Press the button again (
) to allow sound adjustments by the BASS and
TREBLE regulators.
The DIRECT button will not affect the operation of LOUDNESS.
Note:
Using DIRECT OFF and BASS / TREBLE regulators at high volume levels can
damage this amplifier and/or speakers. This may void your warranty.
TREBLE regulator (front panel):
You can adjust treble output of the amplifier. The default: the knob is in the
center position : the marker on the knob in the vertical position. Turn the knob
counterclockwise (-) to decrease the amount of high frequencies. Turn the knob
clockwise to increase the amount of high frequencies (+).The TREBLE regulator is
active only in the DIRECT OFF mode.
BASS regulator (front panel):
You can adjust bass output of the amplifier. The default: the knob is in the
center position : the marker on the knob in the vertical position. Turn the knob
counterclockwise (-) to decrease the amount of low frequencies. Turn the knob
clockwise (+) to increase the amount of low frequencies (+). The BASS regulator is
active only in the DIRECT OFF mode.
DIMMER (rear panel):
The DIMMER switch is located on the rear panel of the amplifier. Select ON to switch
on the backlight of the vacuum tube window and OFF to switch it off.
USB
connection:
Computers with Windows®
1. Install the USB BRAVO-HD Audio Device driver (supplied by SAVITEC, USB Audio
IC manufacturer)– applies only for the Windows® operating system.
Note:
At the time of writing this manual the driver is not required for MAC®
computers.
* The driver package as a compressed zip file is available for download on
www.TagaHarmony.com on page of this product.
* After downloading extract the files from the zip file.
* Run the Setup file located in the unzipped folder and follow the installation
instructions on the screen.
* When the installation finishes a shortcut icon “BRAVO-HD Audio CPL” will be
created on the desktop and the restart wizard will appear. Make sure to restart
the computer after the installation is completed.
2. After the computer is restarted connect it with the amplifier via the USB cable
(not supplied with this product).
