6
Remote Controller
1. Prepare two AAA batteries.
2. Remove the rear cover.
3. Insert the batteries into the battery compartment. Carefully follow the polarity
diagram inside the battery compartment ( po and negative - symbols).
4. Reinstall the rear cover.
Note:
•
Always use AAA batteries and do not use the rechargeable batteries.
•
Do not mix new batteries with old batteries or different kinds of batteries.
•
If the batteries run out, remove the old batteries and replace them with new ones
within several minutes.
•
If the batteries are placed incorrectly, they can cause explosion.
•
Remove the batteries if the remote control is not used for a long period of time.
•
Do not handle and store the batteries together with metallic tools.
Operating Range
Battery Installation
Use the remote control within a range of 7 meters from the amplifier and angles of up
to 30 degrees aiming at the remote control sensor.
Note:
Exposing the remote control sensor to direct sunlight or strong light may cause
faulty operation.
Summary of Contents for HTA-1200
Page 1: ...HTA 1200 HIGH FIDELITY HYBRID INTEGRATED AMPLIFIER Instruction Manual ...
Page 14: ...14 Notes ...
Page 15: ...15 Notes ...