Operations Manual
SV-2000-IX
Document Number: 275-MNL-002
Page 80 of 84
Version 1.0. 08/25/2010
6.11 Removing the Server Cover
The location of the mounting screws securing
the server cover varies per server model. To
remove the cover, use a Phillips screwdriver to
remove all screws from the sides and top of the
cover.
NOTE:
It is important to make note of the
location from which screws are removed
since different screw lengths may be used
to secure the cover.
CAUTION
It is not safe to operate TAG servers
without the cover in place. Failure to take
this precaution may result in personal
injury and system damage.
6.12 Adding or Replacing System Memory
This section lists the procedures for adding or
replacing system memory.
WARNING
Ensure that the system is powered-down
and all power sources have been
disconnected from the server prior to
removing or replacing system memory.
Failure to do so could result in serious
injury from electrical shock.
CAUTION
Printed circuit boards and hard drives
contain electronic components that are
