STEP 7
Remove the terminal (59) from selector shaft (25). Remove 2 pan head Allen bolt M10x25
(72), 2 spring washer (64) and 2 flat washers (63) from guide-rod (22). Incline the guide-rod (22) as
shown in the drawing and then remove the combination of the top weight stack (24) and selector shaft
(25). Make sure the shock absorber rubber and the weight lift are in the right position as shown in the
drawing, then put 19 weight stacks (23) to the guide-rod (22) and insert back the combination of the top
weight stack (24) and selector shaft (25). Assemble the guide-rod (22) to the tower frame (1) using 2
flat washers (63), 2 spring washer (64) and 2 pan head Allen bolt M10x25 (72). Connect the terminal
(59) to the selector shaft (25) and using the right tools to tighten bolts and nuts properly.
Fix the cable (58) in the cam frame (2) using 5 Allen head set screw M8x8 (84).
Nº English description
Qt
1
TOWER FRAME
1
2
CAM FRAME
1
22 GUIDE-ROD
2
23 WEIGHT STACK
19
24 TOP WEIGHT STACK
1
25 SELECTOR SHAFT
1
58 CABLE
1
59 TERMINAL
1
63 FLAT WASHER
2
64 SPRING WASHER
2
72 PAN HEAD, ALLEN BOLT M10x25
2
84 ALLEN HEAD SET SCREW M8x8
5
