STEP 8
Remove the cable(50) from selector shaft(31) and remove 2 spring washer(62), 2 flat
washers(52) and 2 pan head Allen bolt M10x25(63) from guide-rod(16). Incline the guide-rod(16) as
shown in the drawing and then remove the combination of the top weight stack(30) and selector
shaft(31). Make sure the shock absorber rubber is in the right position, then put 15 weight stacks(28)
to the guide-rod(16), insert back the combination of the top weight stack(30) and selector shaft(31).
Assemble the guide-rod(16) to the tower frame(1) using 2 spring washers(62), 2 flat washers(52) and
2 pan head Allen bolt M10x25(63) using 1 Allen bolt round head M8x80(68) lock the 3 first weight in
the position of the weight stack(29). Connect the cable(50) to the selector shaft(31) and using the
right tools tighten properly bolts and nuts.
No.
English description
Qty
1
TOWER FRAME
1
16
GUIDE-ROD
2
28
WEIGHT STACK
14
29
WEIGHT STACK
1
30
TOP WEIGHT STACK
1
31
SELECTOR SHAFT
1
32
WEIGHT SELECTOR PIN
1
50
CABLE
1
52
FLAT WASHER
47
62
SPRING WASHER
4
63
PAN HEAD, ALLEN BOLT M10x25
2
68
ROUND HEAD, ALLEN BOLT M8x80
1
63
63
62
62
52
52
1
16
16
31
30
32
28
29
28
50
68
