All the units in the TAG McLaren Audio F3 Series are double
insulated and do not require safety ground connections.
Your system does not need to be connected to ground (audio
engineers call this ‘floating’). However, if you want to ground
your system, please contact your retailer who will be able to
assist you.
grounding
your system
17
grounding
The AC mains supply normally operates at either 50 or 60 Hz
(depending on which country you are in). Under some
circumstances, this can cause an audible hum in your
loudspeakers.
Should you have any problems with hum in your system,
please contact your retailer.
To minimise the possibility of mains hum in your system:
do not link the ground terminals of separate audio units
together.
use screened cable for your signal connections and keep
the left and right channel cables close together.
Consult the instructions for your turntable, tone arm and cartridge
for the manufacturer’s recommendations on grounding. If your
tone arm has a separate flying lead, you should connect it to the
ground terminal on the back panel of your PA10.
avoiding hum
grounding a
turntable on
your
....
16
grounding
ground
GRA00046.1-[CA]PA10 13/03/01 10:41 Page 17
