background image

care and maintenance

19

running in

18

cleaning

service

care and maintenance

In order to maintain the appearance of your F1 AvantGarde
loudspeakers, you can clean them as follows:

Any grease or dirt on the enclosure may be removed with a soft,
lint- free cloth moistened slightly with a mild solution of warm
water and detergent or washing up liquid. Do not use any other
solutions. Do not use any solvents or abrasives.

Take great care not to get any liquid inside the loudspeaker
enclosure or on the drive unit diaphragms. If this happens, you
should have your F1 AvantGarde loudspeakers serviced.

Under no circumstances should you attempt to service your F1
AvantGarde loudspeakers. All servicing should be carried out by
one of our authorised service agents.

If service is required, please contact your authorised TAG
McLaren Audio retailer. If your F1 AvantGarde loudspeakers are
still under guarantee, please refer to the guarantee card which
gives you details on how to claim against the guarantee.

Please package your F1 AvantGarde loudspeakers carefully
when transporting or shipping. If you do not have the correct
packaging at this time, please contact TAG McLaren Audio 
for assistance.

running in

warming up

running in

TAG McLaren Audio products are designed to give optimum
performance for many years.

The performance of your F1 AvantGarde will improve during the
first 48 hours of operation. You may wish to play some program
material at a moderate level continuously for this period of time
before seriously listening to your F1 AvantGarde loudspeakers.
Your loudspeakers will continue to improve over the next 100
hours of use.

Every time you use your F1 AvantGarde loudspeakers, the
performance will improve until the components have reached
their optimum operating temperature which is usually achieved
within 5-10 minutes of operation.

GRA00072.06-[CN]F1 Use Man  12/10/99  12:09 pm  Page 18

Summary of Contents for F1 AvantGarde











Reviews: