installation
12
installation
13
loudspeaker
connection
connection
Use high-quality loudspeaker cable. Connect the red (positive)
terminal of your right loudspeaker to the right positive output
terminal on the back of your amplifier. Then connect the black
(negative) terminal of your right loudspeaker to the right negative
output terminal on the back of your amplifier. Repeat this
procedure to connect your left loudspeaker using the left positive
and negative terminals on the back of your amplifier.
For best sound quality we only recommend that you use
loudspeaker cables terminated in spade terminals. Unscrew
the terminal enough to push the spade into the slot in the side
of the terminal and then tighten the terminal. If you are unable
to fully tighten the terminal try pushing the spade connector in
a clockwise (tightening) direction. Do not over-tighten the
terminal as it is made from soft gold plated oxygen-free high
purity cooper.
packaging
before
you start
installation
Your F1 AvantGarde loudspeakers have been carefully
packaged for safe transportation. If you have the storage
space, please retain all the original packaging. This will allow
you to transport your loudspeakers safely in the future, for
example when relocating.
Make sure that all the components of your audio system are
disconnected from the AC supply whenever you change
any connections.
GRA00072.06-[CN]F1 Use Man 12/10/99 12:09 pm Page 12
