27
technical data
technical data
26
detection and decoding of
HDCD
®
encoded material is
automatic.
HDCD
®
provides enhanced amplitude
resolution and corrects for sample rate limitations
192 times oversampled pulse density modulated single
bit DAC (oversampling and noise shaping used to
convert 8 times oversampled word data, from digital
filter, to 192 times single bit data)
greater than 100 dB (A-weighted)
2 Hz – 20 kHz
less than 0.003% at 1 kHz
less than ± 0.5 dB at 1 kHz
HDCD
®
digital to analogue
conversion
signal to
noise ratio
frequency response
(+ 0.2 / -- 0.8 dB)
operating
temperature range
greater than 110 dB at 1 kHz
10 – 35
˚
C
50 – 60 Hz
110 – 120 V or 220 – 240 V
The voltage is marked on the rear of the unit
less than 25 W
445 mm wide
75 mm high
320 mm deep
ac supply
frequency
total harmonic
distortion
+
noise
(0 dB full scale)
channel balance
channel separation
power consumption
dimensions
(including feet,
terminals and controls)
ac supply
voltage
We reserve the right to alter design and specification without notice
Specification may vary for different countries
The rated and typical performance applies when the mains supply voltage is either
230 V AC for 220 - 240 V units or 115 V AC for 110 - 120 V units
GRA00046.1-[CA]DAC20 13/03/01 10:06 Page 27
