Turn the
MODE
selector to
pre
if you want to use your 60iRv as
a stand-alone preamplifier without the power amplifier. You may
want to do this if, for example, you have another, higher-quality,
power amplifier (such as our 100P).
In this mode, the power amplifier section of the 60iRv is fully
isolated and switched off. To listen to your sound sources, you
need to connect the preamplifier output of the 60iRv to one or
more external power amplifiers.
Turn the
MODE
selector to
pre-power av
(1)
if you want to use
the preamplifier and power amplifier sections of your 60iRv
separately. The internal connection between the preamplifier
and the power amplifier is opened. This mode is useful for
connecting external sound processors, such as surround sound
decoders or loudspeaker equalizers, between the preamplifier
and the power amplifier.
pre-power
av mode
pre mode
18
19
operating modes
operating modes
1. av stands for audio visual
pre-amp out
(connect to external power amplifier)
source
in
preamp
power
amp
sound
processor
preamp
out
power amp
in
source
in
preamp
power
amp
This diagram shows the
connections inside the
60iRv when it is set to
pre
amplifier mode
This diagram shows
the connections inside
the 60iRv when it is set
to
pre-power av
mode,
an optional sound
processor is shown
for illustration
pre
mute
M O D E
integrated
pre - power
pre - power av
pre
mute
M O D E
integrated
pre - power
pre - power av
GRA00046.1-[CA]60iRv 12/03/01 15:20 Page 19
