TAG
Heuer
Timing
Page 5 / 8
5. Transmitter change battery
The transmitter is working with a battery 3V (type CR123A – 1400mAh)
The button
BATT
allows to check the battery level (see chapter BATT – 3.8)
It is recommended to change the battery when test battery show only 1 LED ON
To change battery.
1) Remove the two screws with a torx screwdriver (n°9)
2) Remove gently the bottom cover.
3) Remove the circuit where the battery is fixed
4) Exchange the battery (CR123A) and replace the circuit to the Transmitter. Warning that the 6
connexion pins are well placed.
5) Screw back the cover without forcing
Standard autonomy:
Transmitter OFF:
365 days
Transmitter ON :
45 days (impulses every 10 sec)
Transmitter switches automatically in Stand-by if none impulse during 24h.
