might result in the TAG Heuer Connected Watch becoming in- operative and dangerous.
Charging accessories
To charge the TAG Heuer Connected Watch, use only approved charging accessories.
Your Watch is provided with the following charging accessories: micro USB cable, charging cradle, wall plug.
Use only approved charging accessories. When a charger is not in use, disconnect it from the power source.
It is important to keep the TAG Heuer Connected Watch and the accessories provided therewith in a well-ventilated
area when charging.
Use the charging accessories provided with the TAG Heuer Connected Watch or any other TAG Heuer
approved charging accessories only from the type of power source indicated on the marking label
.
Before you use any power supply, verify that the mains voltage is in accordance with the voltage printed on the
power supply.
Do not overload power outlet, extension cords or convenience receptacles because this might re- sult in a risk of re
or electric shock. To reduce the risk of damage to the cord or the wall charger, pull the wall charger rather than the
cord when you disconnect the charging accessory from the power outlet or convenience receptacle.
Using damaged TAG Heuer Connected Watch charging accessories, or charging when moisture is present, can cause
re, electric shock, injury, or damage to the user or the TAG Heuer Connected.
Watch or other property. Be sure the TAG Heuer Connected Watch and the charging accessories are dry before
charging. When you use the charging accessories to charge the TAG Heuer Connected Watch, make sure that the
USB plug is fully inserted into the adapter before you plug the adapter into a power outlet. Avoid charging the TAG
Heuer Connected Watch in direct sunlight. Do not wear the TAG Heuer Connected Watch while it is charging.
Avoid prolonged skin contact with the connector when the cable is plugged into a power source because it may
cause discomfort or injury. Sleeping or sitting on the connector should be avoided.
In addition to the above:
Do not expose the charger to water while in use; this may cause the charger and the watch to
fail.
Carefully insert the USB cable into the charger base, forcing the cable in the wrong direction
will damage the
charger.
It is recommended to charge the watch in a cool place, in order to prevent overheating of the
watch.
It is not recommended to charge the watch in a place where there is direct sunlight on the
watch, as this may cause
overheating.
When the watch is placed on the charger, and the charger is plugged into a wall, a charging
screen will be
displayed on the watch face, indicating the remaining time to fully charge the
battery.
It is recommended to remove the watch from the charger once it is fully-charged.
If the watch fails to charge, check that the wall plug is fully inserted into the wall outlet, the USB
cable is rmly
attached to the charger, and the watch is properly placed on the charger.
If the watch still does not charge, make sure that there is no dirt or obstruction on the charger’s
pins and make sure
