Troubleshooting
If you have problems operating this product, refer to this section. The most
common problems are listed below, along with likely causes and solutions.
- The car engine has not been started. Start the car engine.
- Incorrect wiring connection. Check the wiring.
- The fuse has been damaged. Replace the fuse.
- The CANBUS box has been damaged. Replace the CANBUS box.
- The volume is too low. Adjust the volume.
- Incorrect wiring connection. Check the wiring.
- The disc is inserted upside down. Insert the disc with the label upward.
- The disc is dirty. Clean the disc.
- The disc is cracked or otherwise damaged. Insert a normal, round disc.
- The files on the discs are in an irregular file format. Check the file format.
- The disc format cannot be played back. Replace the disc.
- The loaded disc is a type this product cannot play. Check what type of disc it is.
- The parking brake lead is not connected or applied. Connect the parking
brake lead correctly, and apply the parking brake.
- The parking brake interlock is activated. Park your vehicle in a safe place
and apply the parking brake.
- Video DVD settings do not match with the DVD. Adjust video DVD settings.
- Video connection is incorrect.
- Battery cable is not correctly connected. Connect the battery cable to the
terminal that is always live.
No power
No sound
The disc does not play
The screen is covered by a caution message and the video cannot be shown
Image flashes or distorted
Preset station lost
