Placing a Call
Answering a Call
Ending a Call
Call Mute and Un-mute
Redial
Call Hold and Resume
To place a call on hold:
Using the handset:
Using the speakerphone:
Using the headset:
Using the handset:
Using the speakerphone:
Using the headset:
Using the handset:
Using the speakerphone:
Using the headset:
1. With the handset on-hook, press
.
1. Pick up the handset.
2. Enter the number, and then press the
Send
soft key.
1. With the headset connected, press
to activate the headset mode.
2. Enter the number, and then press the
Send
soft key.
2. Enter the number, and then press the
Send
soft key.
Pick up the handset.
Press
.
Hang up the handset or press the
End Call
soft key.
Press
.
Press
or the
End Call
soft key.
Press the
End Call
soft key.
Press
to enter the
Placed
list, press
or
to select the desired entry, and then press
or the
Send
soft key.
Press twice when the phone is idle to dial out the last dialed number.
To resume the call, do one of the following:
Press to mute the microphone during a call.
Press again to un-mute the call.
If there is only one call on hold, press
or the
Resume
soft key.
Press or the
Hold
soft key during an active call.
3
Basic Call Features
Note:
During a call, you can alternate between the headset, hands-free speakerphone and handset modes by pressing
the
HEADSET
key, the
Speakerphone
key or by picking up the handset. Headset mode requires a connected headset .
Note:
You can reject an incoming call by pressing the
Reject
soft key.
