Tadiran Telecom Coral IPx Office, Installation And Hardware Reference Manual, Page: 59 / 510

Coral IPx Office Installation Manual Hardware Installation Procedure
2-15
Eq
uipment Insta
llation
2
0
For units mounted onto a rack, skip to Mounting the Office onto a Rack, page 2-16 . To
mount the unit onto a table:
1. Peel off five rubber bumpers provided and affix them onto the bottom panel of
the IPx Office unit as shown in
Figure 2-5 .
Attaching the rubber bumpers on to the bottom panel of the IPx Office unit
will increase the height of the unit by approximately 0.16” (4mm).
2. Turn ON the battery switch. See Figure 6-7 on page 6-7 .
Figure 2-5 Table
Mounting Bumpers
Figure 2-6 IPx Office
Unit Mounted on Table
...................................................................................................
6 Mounting the IPx Office onto a Table
5
4
2
3
1
Attach rubber bumpers
onto five marked positions
on the bottom panel