Tadiran Telecom Coral IPx 500X Installation Procedure And Hardware Reference Manual Download Page 52

Page: 52 / 400

2-12

Coral IPx 800 Installation Manual

uip

ent Insta

lla

tio

Checking the Space and Positioning Requirements

Verify that the cage will be positioned in accordance with local and system
requirements. The spacing requirements as described on

page 2-3, Space Requirements

ensure system operation and maintenance.

Removing the Cage Door

Remove the cage door and set it aside. For more information, see

page 6-24, Removing

the Door

Removing the Locking Bar

The locking bar for shipping reinforces the cage and prevents damage during
shipping. For more information, see

Figure 2-2

. After it is delivered to the customer it

may be discarded.
To remove the locking bracket:

Using a Phillips screwdriver, unfasten the screws (counter clockwise) that connect
the locking bar to the cage.

Remove and discard the locking bar.

If the cage is to be mounted onto a 19” rack, skip to

page 2-14, Mounting the Cage

onto the Rack

Figure 2-2

Removing

the Locking Bar

Right screw

Left screw

Locking bar

Summary of Contents for Coral IPx 500X

















































































































































































































































































































































































































Search results

Summary of Contents for Coral IPx 500X

Reviews:

Brands by name

Popular brands

Tadiran Telecom Coral IPx 500X, Installation Procedure And Hardware Reference Manual

Search results

Summary of Contents for Coral IPx 500X

Reviews:

Brands by name

Popular brands