Tadano RCS-FC1, Manual

Page: 16 / 28

M037970E
Radio-control
16
Radio-control
4. Engine Start-up Operation
[NOTE]
Engine start-up operation is disabled under the emergency stop state. Release
the emergency stop state before the operation.
Press the engine start switch after conforming
that the engine is stopped. The engine start
LED lights up while the switch is pressed and
the engine starts.
After the engine starts up, quickly release
your finger from the switch.
5. Emergency Stop Operation
When the control cannot be made through the
radio-control operation, or when the
surrounding situation becomes dangerous,
press the emergency stop switch. If the switch
is pressed, the engine stops, which stops the
crane operation.
When the switch is pressed, the
emergency stop LED and emergency
stop lamp of the crane light up to indicate
the emergency stop state.
Beep alarm sounds.
How to Release Emergency Stop
Press the switch once again. Then the
emergency stop LED and emergency stop
lamp of the crane turn off and the emergency
stop state is released.
Two-tone alarm sounds.
The emergency stop state is also released when the switch of the control unit is turned
off after the radio-control /manual changeover switch is turned to “Manual” position.
It is dangerous to start up the engine while the motion selection switch of the
manual operation lever or transmitter is under operation, causing sudden
movement of the crane. Start-up the engine after confirming that the operation
levers and motion selection switches are in the neutral position.
The engine is damaged if the starting-up operation of the engine is made while
the engine is rotating. Start-up the engine after confirming that the engine has
stopped.
M22673E
Engine start LED
Engine
start
switch
M22674E
Emergency stop LED
Emergency
stop switch
Warning