Tadano FAUN ATF 220G-5, Operating, Service And Maintenance Manual

Page: 1020 / 1078

Work range limit function
0710_EN_FA036_G2_01_01_00_AML
2003-01
25/38
(cont’d) 4.3 Display example
Fig. 4.3.3. (B) Displays an example of the LCD panel when the left-hand swing angle limit
function is selected. In this example, only the left-hand swing limit is registered and the right-
hand swing limit is not yet registered.
Fig. 4.3.3. (C) Displays an example of the LCD panel when the right-hand swing angle limit
function is selected. In this example, the left-hand swing limit is already registered and the right-
hand swing limit is not yet registered.
Fig. 4.3.3. (B) Display example of LCD panel when the
left-hand swing angle limit function is selected.
In this example, only the left-hand swing limit is
registered and the right-hand swing limit is not yet
registered.
If only the left-hand swing limit is
registered, if the crane enters this area
by left-hand swing, the AML’s auto-stop
function is applied.
However, if the crane enters this area by
right-hand swing, the AML’s auto-stop
function is not applied.
Current swing position
Fig. 4.3.3. (C) Display example of LCD panel when the
right-hand swing angle limit function is selected.
In this example, the left-hand swing limit is already
registered.
The swing area
between the current
position and the
registered right-hand
swing limit position is
regarded as limit area.
Swing position when right-hand swing limit is registered