13
Power unit rear panel / Main unit rear panel
Main Unit
Power Unit
DC2
POWER
ON
OFF
AC IN
DC1
XLR
D1
DC2
DC1
R
UNBALANCED
BALANCED
L
R
L
XLR
DIGITAL INPUT
DC INPUT
COAXIAL
D2
DIGITAL OUTPUT
ANALOG OUTPUT
1
2
3
DC OUTPUT
BALANCED
1. GROUND
2. HOT (+)
3. COLD (-)
2
4
6
3
7
5
1
Main power switch (POWER ON/OFF)
1
Use to switch main power ON/OFF. Press upper side to turn power ON, then press the
button on the remote control or
main unit to set the unit to standby/ON mode. Press the lower side of this switch to turn the main power OFF.
AC IN connector
2
Connect the supplied power cord here.
DC OUTPUT connectors (DC1/DC2)
3
Connect one end of the accessory DC cord here, and the other end of the cord to the main unit’s DC 1/DC 2 INPUT
connectors.
DIGITAL INPUT connectors
4
Connect to a component equipped with a digital output connector.
XLR (balanced) type (D1)
•
COAXIAL type (D2)
•
DIGITAL OUTPUT connector
5
Connect to a component equipped with a digital input connector.
XLR (balanced) type
•
DC INPUT connectors (DC1/DC2)
6
Connect one end of the accessory DC cord here, and the other end of the cord to the power unit’s DC 1/DC 2 OUTPUT
connectors.
ANALOG OUTPUT connectors
7
Connect to Pre-Amplifier
UNBALANCED RCA type
•
BALANCED XLR type
•
