[–]
[+]
18650 Battery
Getting to Know your
TactX-LM500 LED Flashlight
It is important to familiarize yourself with the LM500 LED
Flashlight before operation for safe, optimal performance.
Installing/Replacing the Battery
The LM500 accepts any 18650 Lithium-Ion 3.7V Rechargeable
Battery.
The use of incompatible batteries or chargers will
void the warranty at the discretion of TactX.
Be sure the
flashlight is turned off before installing or replacing the battery.
1. Unscrew the
Tail End Cap(F)
.
2. Always inspect the battery for signs of swelling, stress, discol-
oring, or leaking, as these symptoms indicate that the battery
will need to be properly handled and disposed.
(Reference
the “18650 Lithium-Ion Battery Maintenance Guide.”)
3. Insert the Battery Po) end first into the flashlight.
4. Carefully screw the
Tail End Cap(F)
ensuring a tight fit. Align
properly to prevent stripping the screw threads. The tail end
cap must be securely hand fastened to function properly.
Telescopic Lens Adjustment
Fully Open:
Concentrated
Light Beam
Fully Closed:
Broad
Light Beam
Direct Plug-in Charging
If you decide to use the Direct Plug-in Charger(D) capability,
you will never need to remove the battery from the flashlight
to recharge. Follow these simple steps to use this feature:
1. Always make sure your battery has been properly installed,
and be sure the flashlight is turned off before charging.
(Reference Section: “Installing/Replacing the Battery.”)
2. Pull the
Telescopic Focal Lens(A)
out until you reveal the
small
Rubber Tab(B).
Then,
pull the Rubber Tab out to
expose the
Charging Socket(C)
.
3. Plug the
Direct Plug-in Charger(D)
into an AC 100-240v
wall outlet. You will see a green LED light emit on the
Charger. Then, plug the small connector end of the Direct
Plug-in Charger into the Flashlight’s
Charging Socket(C).
4. Push once on the
Tail Push Button(E)
to activate the
charging LED indicator on the
Direct Plug-in Charger(D)
.
Solid Red = Charging / Solid Green = Fully Charged.
5. When the LED light turns green on the
Direct Plug-in
Charger(D)
, charging is complete. Charge time on a
90-100%-depleted battery is approximately 8-10 hrs.
6. When charging is complete, click the tail push button once
to turn off and then unplug the
Direct Plug-in Charger(D)
from the wall outlet. Reverse directions in step 2.
For more details on how to use the Direct Plug-in
Charger, reference the “Direct Plug-in Charger
Instructions” that came with your charger.
Charging
Socket(C)
Belt Clip
Telescopic
Focal Lens(A)
Wrist Strap
Rubber Tab(B)
Tail Push Button(E)
Tail End Cap(F)
Twist off
Tail End
Cap(F)
to reveal
battery.
Required Accessories
One(1) charger and one(1) battery are required to operate
your TactX-LM500 Flashlight. We only recommend purchas-
ing them from
www.tactxflashlights.com
for optimal and
safe operation of the LM500 product:
18650 2200mAh / 3.7V
Lithium-Ion Rechargeable Battery
Item# TX18650A
Direct Plug-in Charger(D)
Item# TX0500DPC
18650 Single Battery
Wall Charger
Item# TX18650SBWC
TactX Flashlights accepts no liability for dam-
age and injuries arising from misuse, improper
maintenance, or outside accessories that are
incompatible with the LM500 LED Flashlight
and its accessories—TactX reserves the right
to void the Manufacturer’s Warranty at anytime.
**1-Year Mfg. Warranty covers manufacturer’s defects ONLY, and
DOES NOT INCLUDE cosmetic blemishes, scratches and normal wear.
Reference the warranty insert, “1-Year Manufacturer’s Warranty” or go
to
www.tactxflashlights.com/LM500warranty
for details.
©2017 TactX Flashlights, LLC. Contact us: [email protected]
