13
Follow the steps below to attach the hose to the controller unit:
1 . Hold the hose connector by the tabs on the back of the latch
making sure that the arrow is facing up (Figure 3 .2 .b) .
Figure 3.2.b: Connecting the Hose to the Controller Unit
2 . Align the arrowed latch with the notch on the controller unit port .
3 . Reposition your hand so your thumb and fingers are positioned
on the top and bottom latch ridges . This enables you to slide the
latch (Figure 3 .2 .c) .
Figure 3.2.c: Proper Handling of the Hose Connector
