Battery
IMPORTANT:
Please verify the battery is fully charged before first use.
Battery is preinstalled in battery pocket, no connections are required to start using AffloVest.
To check charge level of battery, press white button on the battery to illuminate green LEDs.
Battery fully charged: all five LED bars should be lit after pressing button on battery.
Charging Battery
Plug in power supply to wall outlet and ensure LED on power
supply comes ON.
Connect power supply to charging port on battery, towards
bottom of battery pouch.
Battery LEDs will light up (wait approximately 10 seconds)
indicating that battery is now charging.
Charge until all the green LEDs are solid on the battery.
This should take approximately three (3) hours. When charging,
the green LED will blink indicating current charge level.
Unplug the power supply from outlet when fully charged.
Battery will last at least two hours on the highest setting.
It is not recommended to start a treatment if only one green LED is illuminated on the battery;
the battery may not last through a full treatment.
If a fully charged battery has been unplugged from charger for approximately 30 days, please check the
charge level of the battery before attempting to use. If necessary, charge the battery appropriately.
A battery indicator on the controller will blink when the battery is getting low and has approximately
30 minutes of use remaining.
Power Supply
The AffloVest can be used when plugged into the power
supply while charging if battery is low.
Power supply will charge AffloVest battery, even if AffloVest
is in use.
Power consumption is approximately 30 Watt.
Designed for use with AC voltage of 100 ~ 240VAC/50 ~ 60Hz.
3
Please make sure the power
cord is plugged into the bottom
of AffloVest when charging
