9
Customer Service Toll-Free: 800.575.1900
Controller Layout
(Standby)
Press and hold
to turn controller
On and Off
GO
Press to start
pre-programmed
GO sequences
P
V
D
Percussion,
Vibration,
Drainage modes
High intensity
Medium intensity
Low intensity
(Play/Pause)
Press to start
treatment from
Main Menu Press
to select Program/
Usage Menus
(Up/Down)
Press to navigate
through menu
items
(Left/Right)
Press to
change current
highlighted
selection
Running a Treatment Cycle
When the AffloVest is properly setup, press and hold
the
(Standby) button on the controller After a brief
start-up period (Figure 1), the controller will navigate to the
Main Menu (Figure 2)
Figure 1 Welcome Screen
Figure 2 Main Menu
Treatment may be started at any time by hitting the
(Play/Pause) button from the Main Menu Pressing the
following buttons will update the treatment whether the
vest is running or not:
P: Percussion mode, all motors operate in a pulsed fashion
V:
Vibration mode, all motors operate continuously
D: Drainage mode, motors operate in a pre-programmed
sequential fashion
GO: Automatically starts the GO mode, the system
will perform the following treatments sequentially
(by default):
– Percussion mode, 10 minutes duration at Medium
intensity (followed by a 10 second pause)
– Vibration mode, 10 minutes duration at Medium
intensity (followed by a 10 second pause)
– Drainage mode, 10 minutes duration at Medium intensity
The AffloVest will start in the Medium intensity mode by
default Pressing the following buttons will update the
treatment whether the vest is running or not:
High intensity
Medium intensity
Low Intensity
While treatment is running, the AffloVest may be paused
by pressing the
(Play/Pause) button This shall
suspend treatment until the
(Play/Pause) button is
pressed again
While paused, press and hold the
(Play/Pause) button
to reset the treatment time to the previous setting
