1028 Saunders Lane 610.701.3336 ext. 3746
West Chester, PA 19380 404.558.8652 cell
610.701.2402 fax
9 / 10
Lock & Roll Soft Tonneau Cover
Attention: For Nissan/Toyota trucks (With Utility Tracks) only
1)
Place the side rail (Item RB&RC) on the truck bed, and insert the clamps
(Item RG(B)-A) inside the side rail (Item RB&RC) inner groves.
2)
Distribute evenly the clamps on each side of the cover. Tighten the hex nut
(Item RG(B)-B) on clamps.
3)
Slide the aluminum block (Item RG(B)-C) in the truck bed factory track (see
picture bellow).
4)
Tighten the aluminum block and clamps with the allen wrench (see picture
bellow).
The Item RG (Clamp assembly) will become
a bracket set as below photo (Item RG(B)-
A,B,C). Follow bellow steps to assemble the
side rails (RB, RC) on the truck bed:
Item RG(B)-C Item RG(B)-A
Item RG(B)-B
Item RB&RC
Item RG(B)-A
Item RB&RC
Item RG(B)-B
Item RG(B)-C
