Tactik Lock & Roll Soft Tonneau Installation Instructions Manual Download Page 10

 

 

1028 Saunders Lane                                                                                         610.701.3336 ext. 3746 

West Chester, PA 19380                                                                                            404.558.8652 cell 

                                                                                                                                                    610.701.2402 fax 

10 / 10 

 

Lock & Roll Soft Tonneau Cover 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

INSTALLATION  PRECAUTIONS

 

 

Follow DOT regulations regarding installation and use.

 

 

Park truck on a flat, level, hard surface well away from traffic. Place transmission in park.

 

 

Verify that installation surface has no hidden wires before drilling or driving screws.

 

 

Install only according to these instructions. Improper installation can create hazards.

 

 

Wear ANSI-approved safety goggles and heavy-duty work gloves during assembly and  installation.

 

 

Keep installation area clean and well lit.

 

 

Keep bystanders out of the area during installation.

 

 

Do not install when tired or when under the influence of drugs or medication.

 

 

Weight capacity and other product capabilities apply to properly and completely installed product only.

 

 
 

USE  PRECAUTIONS

 

 

Do not exceed rated weight capacity of Tonneau Cover.

 

 

Do not exceed rated weight capacity of truck. Refer to truck’s Gross Vehicle Weight Rating.

 

 

Use as intended only.

 

 

Inspect before every use; do not use if parts loose or damaged.

 

 

This product is not a toy. Do not allow children to play with or near this item.

 

 

Maintain product labels and nameplates. These carry important safety information.

 

 

The  warnings,  precautions,  and  instructions  discussed  in  this  instruction  manual 
cannotcover all possible conditions and situations that may occur. It must be understood 
by the operator that common sense and caution are factors which cannot be built into 
this product, but must be supplied by the operator.

 

CLEANING

 

Clean with cold water and a cloth. Do use a 
neutral soap and detergents. Do not expose 
to petrol, diesel, oils or chemicals of any 
nature.

 

INTENDED  USE

 

A tonneau cover will help to save you money 
from low gas mileage, lost/damaged cargo 
and theft. It will also protect the bed of your 
truck and help to prevent serious damage 
that will cause repairs to be needed.

 

 

READ AND UNDERSTAND ALL INSTRUCTIONS. FAILURE TO FOLLOW 
ALL INSTRUCTIONS LISTED,  FAIL TO READ MAY RESULT SERIOUS 
INJURY.

 

 

• DO NOT CUT OR MODIFY THE TONNEAU COVER OR MOUNTING 

ACCESSORIES.

 

 

• DO NOT EXCEED THE VEHICLE MANUFACTURER’S  WEIGHT LIMITS.

 

 

• DO NOT USE DAMAGED OR EXCESSIVELY WORN PRODUCTS. 
CONTACT  US  IF  YOU  ARE  UNSURE.

 

 

• THE WARNINGS, CAUTIONS, AND INSTRUCTIONS  DISCUSSED IN THIS 
INSTRUCTION MANUAL CANNOT  COVER  ALL  POSSIBLE  CONDITIONS 
OR  SITUATIONS

 

THAT  COULD  OCCUR.  IT  MUST  BE  UNDERSTOOD  BY

 

THE OPERATOR 

THAT COMMON SENSE AND CAUTION  ARE FACTORS WHICH CANNOT BE 
BUILT INTO

 

THIS PRODUCT, BUT MUST BE SUPPLIED BY THE OPERATOR.

 

   WARNINGS

 

Summary of Contents for Lock & Roll Soft Tonneau











Reviews: