TacT Audio RCS 2.2 XP, Owner'S Manual

Page: 41 / 50

41
Tact Audio
Front Panel > Correction Menu
Access the CORRECTION menu by selecting DRC-RCS from the RCS 2.2 XP
fi rst screen.
CORRECTION menu
To highlight a menu option use the navigational buttons. To enter a highlighted
option press the “ENTER” button.
LEVELS menu Use to set individual channel level.
DELAYS menu
Use to set individual channel delay time and the AUTO/
MANUAL delay option.
NAMES menu Displays the correction preset symbolic names and al-
lows for name based correction preset selection.
PRESET option This option allows for correction preset selection. Place
the screen cursor over this option and use the UP DOWN
buttons to display the desired preset. Press the ENTER
button to make a selection. The active preset has a <
*
>
displayed next to it.
DRC option Use this option to turn dynamic room correctin ON and
OFF. When this option is changed the 2.2 XP will recal-
culate and engage new correction based on the selection
of this parameter.
CRO option
MSR menu
This indicates the status of the corssover package. The menu
it leads to is used to set 2.2 XP crossover parameters.
This menu is used to perform room response measure-
ments for Automatic Room Correction. See p.12 for an
explanation of Automatic Room correction.