3.
Query the set time program with the
button.
The status of the respective time is shown by
means of
"ON"
and
"OFF"
. In this context, the
starting time for a change can be selected,
e.g. “00:00”.
4.
Use
to select the desired action (
SELECTION OF TIME
,
POWER
ON TIME
or
POWER OFF TIME
).
Example: Press
2 x until
POWER OFF TIME
appears and use
to set the desired time
until the next change of the switching phase.
5.
Select the desired action with
.
Example: Press
2 x until
POWER ON TIME
appears and use
to set the desired time
until the next change of the switching phase.
Repeat steps 4 and 5 alternately if there are
multiple switching phases.
6.
Pressing the
button exits the input for the switching times.
1 x return to step 2 to select a new day or block
of days.
If the
button is pressed again, the question
SAVE
the time program
yes/no
appears.
yes
saves the changes and
no
cancels the
changes and discards all adjustments, then
return to point 1.
jumps to the menu selection, see point 1.
If the programmed data is to be discarded, it is
necessary to exit the time programming. Otherwise,
the previously programmed data is still present
despite “Save no”. The controller returns to the
selected operating mode following a timeout of
approx. 2 minutes.
ES 5941
Operation
08/2020 Item no. 215790 EA no. 1321
Operating instructions
20