background image

LIMITED WARRANTY STATEMENT

Taco, Inc. will repair or replace without charge (at the company’s option)

any product or part which is proven defective under normal use within one

(1) year from the date manufacture.
In order to obtain service under this warranty, it is the responsibility of the

purchaser to promptly notify the local Taco stocking distributor or Taco in

writing and promptly deliver the subject product or part, delivery prepaid,

to  the  stocking  distributor.  For  assistance  on  warranty  returns,  the  pur-

chaser may either contact the local Taco stocking distributor or Taco. If the

subject product or part contains no defect as covered in this warranty, the

purchaser will be billed for parts and labor charges in effect at time of fac-

tory examination and repair.
Any Taco product or part not installed or operated in conformity with Taco

instructions or which has been subject to misuse, misapplication, the addi-

tion of petroleum-based fluids or certain chemical additives to the systems,

or other abuse, will not be covered by this warranty.
If in doubt as to whether a particular substance is suitable for use with a

Taco product or part, or for any application restrictions, consult the applic-

able Taco instruction sheets or contact Taco at [401-942-8000].
Taco reserves the right to provide replacement products and parts which are

substantially similar in design and functionally equivalent to the defective

product or part. Taco reserves the right to make changes in details of design,

construction, or arrangement of materials of its products without notification.

TACO OFFERS THIS WARRANTY IN LIEU OF ALL OTHER EXPRESS

WARRANTIES. ANY WARRANTY IMPLIED BY LAW INCLUDING WAR-

RANTIES  OF  MERCHANTABILITY  OR  FITNESS  IS  IN  EFFECT  ONLY

FOR THE DURATION OF THE EXPRESS WARRANTY SET FORTH IN

THE FIRST PARAGRAPH ABOVE.
THE  ABOVE  WARRANTIES  ARE  IN  LIEU  OF  ALL  OTHER  WAR-

RANTIES, EXPRESS OR STATUTORY, OR ANY OTHER WARRANTY

OBLIGATION ON THE PART OF TACO.
TACO WILL NOT BE LIABLE FOR ANY SPECIAL, INCIDENTAL, INDI-

RECT OR CONSEQUENTIAL DAMAGES RESULTING FROM THE USE

OF ITS PRODUCTS OR ANY INCIDENTAL COSTS OF REMOVING OR

REPLACING DEFECTIVE PRODUCTS.

This warranty gives the purchaser specific rights, and the purchaser may

have other rights which vary from state to state. Some states do not allow

limitations on how long an implied warranty lasts or on the exclusion of

incidental  or  consequential  damages,  so  these  limitations  or  exclusions

may not apply to you.

A Taco Family Company

2017

®

CAUTION

This equipment has been tested and found to comply with the limits for

a Class B digital device, pursuant to part 15 of the FCC Rules. These

limits are designed to provide reasonable protection against harmful

interference in a residential installation. This equipment generates, uses

and can radiate radio frequency energy and, if not installed and used in

accordance with the instructions, may cause harmful interference to radio

communications. However, there is no guarantee that interference will

not occur in a particular installation. If this equipment does cause harmful

interference to radio or television reception, which can be determined by

turning the equipment off and on, the user is encouraged to try to correct

the interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to

which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
This  device  complies  with  Industry  Canada  license  exempt  RSS

standard(s). Operation is subject to the following two conditions:
(1) This device may not cause interference, and
(2) This device must accept any interference, including interference that

may cause undesired operation of the device.
Le  présent  appareil  est  conforme  aux  CNR  d’Industrie  Canada

applicables aux appareils radio exempts de licence. L’exploitation est

autorisée aux deux conditions suivantes:

(1) l’appareil ne doit pas produire de brouillage, et
(2) l’utilisateur de l’appareil doit accepter tout brouillage radioélectrique

subi,  même  si  le  brouillage  est  susceptible  d’en  compromettre  le

fonctionnement.
Under  Industry  Canada  regulations,  this  radio  transmitter  may  only

operate  using  an  antenna  of  a  type  and  maximum  (or  lesser)  gain

approved for the transmitter by Industry Canada. To reduce potential

radio interference to other users, the antenna type and its gain should

be so chosen that the equivalent isotropically radiated power (e.i.r.p.) is

not more than that necessary for successful communication.
Conformément  à  la  réglementation  d’Industrie  Canada,  le  présent

émetteur radio peut fonctionner avec une antenne d’un type et d’un gain

maximal (ou inférieur) approuvé pour l’émetteur par Industrie Canada.

Dans  le  but  de  réduire  les  risques  de  brouillage  radioélectrique  à

l’intention des autres utilisateurs, il faut choisir le type d’antenne et son

gain de sorte que la puissance isotrope rayonnée équivalente (p.i.r.e.)

ne  dépasse  pas  l’intensité  nécessaire  à  l’établisse-ment  d’une

communication satisfaisante.
To comply with FCC and Industry Canada RF radiation exposure limits

for general population, the antenna(s) used for this transmitter must be

installed such that a minimum separation distance of 20cm is maintained

between the radiator (antenna) and all persons at all times and must not

be co-located or operating in conjunction with any other antenna or

transmitter.

8

Summary of Contents for LeakBreaker LB-075-H-1LF









Reviews: