background image

Do It Once. Do It Right.™

TACO, INC.

, 1160 Cranston Street, Cranston, RI 02920  Telephone: (401) 942-8000 

Fax:(401) 942-2360

TACO (Canada)

, Ltd., 6180 Ordan Drive, Mississauga, Ontario L5T 2B3 

 Telephone:(905) 564-9436 

Fax:(905) 564-9436

Visit our web site at:

 http://www.taco-hvac.com

Copyright 2003 TACO, INC.

Portions Copyright 2003

tekmar Control Systems Ltd.

tekmar Control Systems.Inc.

Printed in USA

8

LIMITED WARRANTY STATEMENT

Taco, Inc. will repair or replace without charge (at the company’s option) any product or part which is proven defective under normal 

use within one (1) year from the date of start-up or one (1) year and six (6) months from date of shipment (whichever occurs first).

Taco, Inc. will repair or replace without charge (at the company’s option) any i Series Mixing Valve body that is proven defective under 

normal use within three (3) years from the date of start-up or three (3) years and six (6) months from date of shipment (whichever 

occurs first).

In order to obtain service under this warranty, it is the responsibility of the purchaser to promptly notify the local Taco stocking distribu-

tor or Taco in writing and promptly deliver the subject product or part, delivery prepaid, to the stocking distributor.  For assistance on 

warranty returns, the purchaser may either contact the local Taco stocking distributor or Taco.  If the subject product or part contains 

no defect as covered in this warranty, the purchaser will be billed for parts and labor charges in effect at time of factory examination 

and repair.

Any Taco product or part not installed or operated in conformity with Taco instructions or which has been subject to misuse, misapplica-

tion, the addition of petroleum-based fluids or certain chemical additives to the systems, or other abuse, will not be covered by this 

warranty.

If in doubt as to whether a particular substance is suitable for use with a Taco product or part, or for any application restrictions, consult 

the applicable Taco instruction sheets or contact Taco at [401-942-8000].

Taco reserves the right to provide replacement products and parts which are substantially similar in design and functionally equivalent 

to the defective product or part.  Taco reserves the right to make changes in details of design, construction, or arrangement of materials 

of its products without notification.

TACO  OFFERS  THIS  WARRANTY  IN  LIEU  OF  ALL  OTHER  EXPRESS  WARRANTIES.    ANY  WARRANTY  IMPLIED  BY  LAW 

INCLUDING WARRANTIES OF MERCHANTABILITY OR FITNESS IS IN EFFECT ONLY FOR THE DURATION OF THE EXPRESS 

WARRANTY SET FORTH IN THE FIRST PARAGRAPH ABOVE.

THE ABOVE WARRANTIES ARE IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR STATUTORY, OR ANY OTHER WAR-

RANTY OBLIGATION ON THE PART OF TACO.

TACO WILL NOT BE LIABLE FOR ANY SPECIAL, INCIDENTAL, INDIRECT OR CONSEQUENTIAL DAMAGES RESULTING FROM 

THE USE OF ITS PRODUCTS OR ANY INCIDENTAL COSTS OF REMOVING OR REPLACING DEFECTIVE PRODUCTS.

This warranty gives the purchaser specific rights, and the purchaser may have other rights which vary from state to state.  Some states 

do not allow limitations on how long an implied warranty lasts or on the exclusion of incidental or consequential damages, so these 

limitations or exclusions may not apply to you.

Summary of Contents for i Series









Reviews: