TACKLIFE PBS01A, Manual

Page: 13 / 28

• Original operating instructions
4
，
Intended use
The bandsaw is designed to perform longitudinal and cross cuts on timber or wood-type
materials. To cut round materials you must use suitable holding devices.
The equipment is to be used only for its prescribed purpose. Any other use is deemed to be a
case of misuse. The user / operator and not the manufacturer will be liable for any damage or
injuries of any kind caused as a result of this.
The machine is to be operated only with suitable saw blades. To use the machine properly you
must also o serve the safety regulations, the assembly instructions and the operating
instructions to be found in this manual.
All persons who use and service the machine have to be acquainted with this manual and must
be informed about the machine’s potential hazards.
It is also imperative to observe the accident prevention
regulations in force in your area. The same applies for the general rules of occupational health
and safety.
The manufacturer shall not be liable for any changes made to the machine nor for any damage
resulting from such changes.
Even when the machine is used as prescribed it is still impossible to eliminate certain residual
risk factors. The following hazards may arise in connection with the machine’s construction and
design:
• Damage to hearing if ear-muffs are not used as necessary.
• Harmful emissions of wood dust when used in closed rooms.
• Contact with the blade in the uncovered cutting zone.
• Injuries (cuts) when changing the blade.
• Injury from catapulted work pieces or parts of work- pieces.
• Crushed fingers.
• Tilting of the workpieces due to inadequate support.
• Touching the blade.
• Catapulting of pieces of timber and workpieces. Please note that our equipment has not
been designed for use in commercial, trade or industrial applications. Our warranty will be
voided if the machine is used in commercial, trade or industrial businesses or for equivalent
purposes.
5
，
General safety information
Attention! The following basic safety measures must be observed when using electric tools for
protection against electric shock .and the risk of injury and fire.