Step 5
Rotate to Entangle the Blockage
Set the
front operation handle to the
position
of
"O",
the
cable
keeping
rotating only and no forward or
backward,
so that the
blockage
can
be
wrapped tightly and easy to clean.
Step 6
Retract the Cabe and Clean up the
Blockage
Push the front operation handle to the
position of "R", start the machine, retract
the
cable
back to
the
nozzle,
and
then
remove the garbage.
Note: Repeat the above steps until the
garbage completely cleaned.
Step 7
Cleaning and Maintenance
Clean work is done, please dry the cable
and then retract
it to the machine to
avoid rusting of the cable.
If the hub is filled with water
, loosen the
screws on the hub with a hexagonal
wrench to drain it out.
W
arning: Please keep it fully charged
after using it. Check every two or three
months,
charge and
discharge
to
avoid
insuf
ficient battery power or damage.
Step 8
Attention: Cables are consumables and
easily damaged. When the flexible shaft
is damaged, please purchase a new one
(model:
Tacklife-HGD1C) to replace or
contact us.
Tips:
1.
If
the
damaged
cable
is
retracted
completely
into
the
machine,
the
cable
is
unable to be replaced.
2. While replacing the cable, please
unplug the battery
, manually pull
out/plug
back
the cable
to
avoid tangling
and injury
.
O
R
No.B714,Niulanqian Building, Minzhi Road, Longhua
District, Shenzhen, Guangdong, China 518000
Shenzhen T
ake T
ools Co., Ltd.
