A-1
A
ODBC32 Administrator Setup
The procedures in this appendix provide the instructions necessary
to manually configure the ODBC32 Administrator for use with
AMT, Exporter/Reporter, and the I/NET ODBC Driver.
Follow these procedures
only
if you deselected the ODBC compo-
nent during the I/NET 2000 installation.
Note:
The I/NET ODBC Driver interfaces with I/NET’s access control files.
It is used by other applications that require access to these files.
By default, I/NET’s installation program installs and configures the
ODBC32 Administrator. For this reason, it is strongly recom-
mended that you accept the default installation components. If,
however, you elect
not
to install ODBC32 during the initial instal-
lation, and install it at a later time, you will have to use the
following procedures to manually configure the ODBC32 Admin-
istrator.
1.
To install ODBC32 Administrator, follow the installation
procedure outlined in
“The Setup Program” on page 2-1
. Choose the Custom option.
2.
The Select Components screen allows you to select compo-
nents for installation. Scroll to the second half of the
Components list and select
ODBC32 Administrator
, as
shown in
3.
If necessary, deactivate (
#
) all other components and click
Next
.
4.
Complete the Setup program. If you require instructions on
the remaining screens, refer to Step 13 on page 2-11.
After Setup is complete, you must manually configure the ODBC
components.
6
Summary of Contents for I/NET 2000
Page 1: ...Getting Started I NET 2000 System TCON238 01 02...
Page 4: ......
Page 28: ......
Page 64: ......
